camellia ? – A lightweight hierarchical key-value store, written in Go

camellia is a Go library that implements a simple, hierarchical, persistent key-value store, backed by a SQLite database.
It is paired to the cml command line utility, useful to read, write and import/export a camellia DB.
The project was born to be part of a Linux embedded system as a system-wide settings registry, similar to the one found in Windows.


At a glance

package examples

import (

	cml ""

func main() {
	_, err := cml.Init("/home/debevv/cml.db")
	if err != nil {
		fmt.Printf("Error initializing camellia - %v", err)

	// Set a string value
	cml.SetValue("/status/userIdentifier", "ABCDEF123456")

	// Set a boolean value
	cml.SetValue("/status/system/areWeOk", true)

	// Set a float value
	cml.SetValue("/sensors/temperature/latestValue", -48.0)

	// Set an integer value
	cml.SetValue("/sensors/saturation/latestValue", 99)

	// TODO: Set a custom struct. See issues, may be supported in future

	// Read a single value
	temp, err := cml.GetValue[float64]("/sensors/temperature/latestValue")
	fmt.Printf("Last temperature is: %f", temp)

	// Read a tree of entries
	entry, err := cml.GetEntries("/sensors")
	fmt.Printf("Last update date of saturation value: %v", entry.Children["saturation"].LastUpdate)

	// Export whole DB as JSON
	j, err := cml.ValuesToJSON("/")
	fmt.Printf("All DB values:\n%s", j)

	// Import DB from JSON file
	file, err := os.Open("db.json")
	cml.SetValuesFromJSON(file, false)

Installation and prerequisites


  • Go 1.18 or greater, since this module makes use of generics
  • A C compiler and libsqlite3, given the dependency to go-sqlite3


Inside a module, run:

go get



The data model is extremely simple.
Every entity in the DB is ab Entry. An Entry has the following properties:

LastUpdate time.Time
IsValue    bool

When IsValue == true, the Entry carries a value, and it’s a leaf node in the hierarchy. Values are always represented as strings:

Value string

When IsValue == false, the Entry does not carry a value, but it can have Children. It is the equivalent of a directory in a file system:

Children map[string]*Entry

This leads to the complete definition an Entry, excluding the DB-specific properties:

type Entry struct {
	LastUpdate time.Time
	IsValue    bool
	Value      string
	Children   map[string]*Entry


Paths are defined as strings separated by slashes (/). At the moment of writing this document, no limits are imposed to the length of a segment or to the length of the full path.
The root Entry is identified as a single slash /.
When specifying a path, the initial slash can be omitted, so, for example, my/path is equivalent to /my/path, and and an empty string is equivalent to /.

Database versioning and migration

The schema of the DB is versioned, so after updating the library, Init() may return ErrDBVersionMismatch. In this case, you should perform the migration of the DB by calling Migrate().

Setting and forcing

When setting a value, if a an Entry at that path already exists, but it’s a non-value Entry, the operation fails.
Forcing a value instead will first delete the existing Entry (and all its children), and then replace it with the new value.


The library API should be safe to be called by different goroutines.
Regarding the usage of the same DB from different processes, it should be safe too, but more details will be added in the future (TBD).


The internal data format for Entries‘ values is string. For this reason, the library API offers a set of methods that accept a type parameter and automatically serializes/deserializes values to/from string. Example:

// Gets the value at `path` and converts it to T
func GetValue[T Stringable](path string) (T, error)

// Converts `value` from T to `string` and sets it at `path`
func SetValue[T Stringable](path string, value T) error

The constraint of the type parameter is the Stringable interface:

type Stringable interface {

that in turn is composed by the BaseType interface, the collection of almost all Go supported base types.
Data satisfying the BaseType interface is serialized using fmt.Sprint() and deserialized using fmt.Scan.

Note on custom types

The library defines an additional interface for serialization:

type CustomStringable interface {
	String() string
	FromString(s string) error

intended to be used as a base for user-defined serializable types.
Unfortunately, support to custom types is not implemented at the moment, since go 1.18 does not allow to define Stringable in this way:

type Stringable interface {
  BaseType | CustomStringable

since unions of interfaces defining methods are not supported for now.

Please refer to this comment for more details.

JSON import/export


Entries can be imported/exported from/to JSON.
Two different formats are supported:

  • Default: meant to represent only the hierarchical relationship of Entries and their values. This will be the format used in most cases:

  "status": {
    "userIdentifier": "ABCDEF123456",
    "system": {
      "areWeOk": "true"
  "sensors": {
    "temperature": {
      "lastValue": "-48.0"
    "saturation": {
      "lastValue": "99"

This format is used by the following methods:

func SetValuesFromJSON(reader io.Reader, onlyMerge bool) error
func ValuesToJSON(path string) (string, error)
  • Extended: carrying the all the properties of each Entry. The format was created to accommodate any future addition of useful metadata:

  "status": {
    "last_update_ms": "1641488635512",
    "children": {
      "userIdentifier": {
        "last_update_ms": "1641488675539",
        "value": "ABCDEF123456"
      "system": {
        "last_update_ms": "1641453675583",
        "children": {
          "areWeOk": {
            "last_update_ms": "1641488659275",
            "value": "true"
  "sensors": {
    "last_update_ms": "1641453582957",
    "children": {
      "temperature": {
        "last_update_ms": "1641453582957",
        "children": {
          "lastValue": {
            "last_update_ms": "1641453582957",
            "value": "-48.0"
      "saturation": {
        "last_update_ms": "1641453582957",
        "children": {
          "lastValue": {
            "last_update_ms": "1641453582957",
            "value": "99"

This format is used by the following methods:

func SetEntriesFromJSON(reader io.Reader, onlyMerge bool) error
func EntriesToJSON(path string) (string, error)

A note on last_update_ms: this property will be put in the JSON when exporting, but ignored when importing. The value of this property will be set to the timestamp of the actual moment of setting the Entry.

Import and merge

When importing from JSON, two distinct modes of operation are supported:

  • Import: the default operation. Overwrites any existing value with the one found in the input JSON. When overwriting, it forces values instead of just attempting to set them.
  • Merge: like import, but does not overwrite existing values with the ones found in the input JSON


Hooks are callback methods that can be registered to run before (pre) and after (post) the setting of a certain value:

// Register a pre set hook to check the value before it is set
cml.SetPreSetHook("/sensors/temperature/saturation", func(path, value string) error {
    saturation, err := strconv.Atoi(value)
    if err != nil {
        return fmt.Errorf("invalid saturation value")

    // Block the setting of the value if it's out of range
    if saturation < 0 || saturation > 100 {
        return fmt.Errorf("invalid saturation value. Must be a percentage value")

    return nil

// Register an async post set hook and react to changes
cml.SetPostSetHook("/status/system/areWeOk", func(path, value string) error {
    if value == "true" {
        fmt.Printf("System went back to normal")
    } else {
        fmt.Printf("Something bad happened")

    return nil
}, true)

Hooks can be synchronous or asynchronous:

  • Synchronous hooks are run on the same thread calling the Set() method. They can block the setting of a value by returning a non-nil error.
  • Asynchronous hooks are run on a new goroutine, and their return value is ignored (so the can’t block the setting). Only post set hooks can be asynchronous.

cml utility

At a glance

# Set some values
cml set status/userIdentifier "ABCDEF123456"
cml set /status/system/areWeOk "true"
cml set "sensors/saturation/latestValue" 99
cml set /sensors/temperature/latestValue "-48.0"

# Get a value
cml get /sensors/temperature/latestValue
# -48.0

# Get some values
cml get /sensors
# {
#   "saturation": {
#       "latestValue": "99"
#   },
#   "temperature": {
#       "latestValue": "-48.0"
#   }
# }

# Get Entries in the extended format
cml get -e sensors/temperature
# {
#    "last_update_ms": "1641453582957",
#    "children": {
#      "lastValue": {
#        "last_update_ms": "1641453582957",
#        "value": "-48.0"
#      }
#    }
# }

# Try to get a value, fail if it's a non-value
cml get -v sensors
# Error getting value - path is not a value

# Merge values from JSON file
cml merge path/to/file.json


Install cml globally with:

go install[email protected]

Just the output of cml help

cml - The camellia hierarchical key-value store utility
cfg get [-e] [-v] <path>        Displays the configuration entry (and its children) at <path> in JSON format
                                -e        Displays entries in the extended JSON format
                                -v        Fails (returns nonzero) if the entry is not a value
cfg set [-f] <path> <value>     Sets the configuration entry at <path> to <value>
                                -f        Forces overwrite of non-value entries
cfg delete <path>               Deletes a configuration entry (and its children)
cfg import [-e] <file>          Imports config entries from JSON <file>
                                -e        Use the extended JSON format
cfg merge [-e] <file>           Imports only non-existing config entries from JSON <file>
                                -e        Use the extended JSON format
cfg migrate                     Migrates the DB to the current supported version
cfg wipe [-y]                   Wipes the DB
                                -y        Does not ask for confirmation
cfg help                        Displays this help message

Database path

cml attempts to automatically determine the path of the SQLite database by reading it from different sources, in the following order:

  • From the CAMELLIA_DB_PATH environment variable, then
  • From the file /tmp/camellia.db.path, then
  • If the steps above fail, the path used is ./camellia.db


View Github